AKSOPEEK®LCF | Properties
| Performance | Reference standards | Unit | Actual measurement results |
| Carbon fiber mass content | ASTM D3529 | % | 66 |
| Density | ASTM D792 | g/cm³ | 1.58 |
| Hardness | ASTM D785 | / | 104 |
| Tensile strength | ASTM D3039 | MPa | 880 |
| Tensile modulus | ASTM D3039 | GPa | 73 |
| Bending strength | ASTM D7264 | MPa | 1400 |
| Bending modulus | ASTM D7264 | GPa | 65 |
| Compressive strength | ASTMD 6641 | MPa | 670 |
| Compression modulus | ASTMD 6641 | GPa | 60 |
| Hot deformation temperature | ASTM D648 | ℃ | 332 |
| Compression strength after impact | ASTM D7137 | MPa | 225 |
| Type I interlayer fracture toughness | ASTM D5528 | J/m² | 1410 |
| Short beam strength | ASTM D2344 | MPa | 100 |
| In plane shear strength -0.5% | ASTM D3518 | MPa | 130 |
| In-plane shear modulus | ASTM D3518 | GPa | 5.2 |
1. Typical values are injection molding measures.
If needed, please call our technical department for more detailed technical specifications!
2. This performance indicator cannot be used as a material acceptance standard.